PROFILOTEC FLOOR PROFILES- Trims

Jointing of different material coverings, compensation of differing heights, contouring of edges, terminal finish with traditional profile materials or innovative ones to provide a modern look.

A complete range of profiles for floor coverings created specifically for tile and marble laying and a comprehensive series of profiles suitable for edging and finishing a large variety of coverings known on the market.

PROFILOTEC® offers both technical and decorative solutions. Simple sections for essential, discreet finishes. Or more decorative solutions, which add aesthetically to surfaces while remaining in harmony with surroundings and ceramics. A vast range to offer specific solutions aimed at guaranteeing a state of the art detailed floor covering job.

For information visit www.profilitec.com

STAIR NOSING PROFILES- Trims

When finishing a staircase with ceramic or other flooring materials it is important to consider two important factors: safety and appearance. By using the proper profile both these requirements can be satisfied.

Profiles with anti-slip insert rubber strips or tread grooves provide a higher safety feature. The use of a stair nosing allows the choice of a wide range of floor coverings. Many ceramic tiles, for example, do not have special edging profiles available for use on stairs.

PROFILITEC® proposes a wide range of technical stair nosings, suitable for all kinds of floor coverings and perfectly meeting with the European safety standards currently in force: ideal then for renovations and updating works of public buildings. The profile offers a long lasting protection and better defines the step and ensures resistance to wear and tear over time.

For information visit www.profilitec.com

WALL COVERING PROFILES- Trims

To join, protect, decorate; these are the functions of this product line.

Fast application, economical solution and lasting performance are the most evident benefits. The application of profiles over the sharp corners is a true safeguarding measure especially to prevent single firing ceramic tiles from chipping. The time saving factor for installing the tile covering is quite relevant when one can avoid the 45° corner cut. The profile will also help the layer for the line-up and the straight vertical edge. There are also numerous solutions for internal corners making them easy to clean as such features are implemented by the current European hygiene and safety standards.

Aluminum, brass, stainless steel and non-toxic synthetic materials: over 30 different types of trim finishes enabling the user to coordinate them with tile colours and grout and to create a decorative contrast.

For information visit www.profilitec.com

EXPANSION JOINTS- Trims

Settlement, deflection, expansion, creeps, shrinkage, thermal and moisture excursions, all these factors contribute to movements and solicitations on the building’s structure frame. It is then advisable that a proper expansion and structure joints layout planning is implemented both during the slab/mortar-bedding phase and at floor level.

Planning for the right type of joint is a task, which involves the calculations of the movement solicitations, tensile strengths and the thermo-hygrometric coefficient readings, in relation to the type of construction and relative coverings and to how they interact with all the combined building materials. The underlying mortar bed sectioning is a determining factor in guaranteeing a job well done, whether the covering is laid with the thin bed adhesive or the traditional deep bed method.

An expansion joint must be placed whenever:

• In correspondence to an underlying substrate material change or alteration and/or slab casting discontinued placements.
• In correspondence to pre-existing discontinuities in substrate such as structural construction joints, screed section edges.
• In correspondence to fixed elements like columns and doors, entrances.
• Where there is a change of direction in tiling patterns.
• Where tiled floors abut walls or restraining features.

The resulting bays should be as regular as possible. The proportion between the two bay sides should generally not exceed 2:1.

For information visit www.profilitec.com

PROFILES FOR TERRACES & BALCONIES- Trims

A complete range of perimeter multi-purpose profiles for balconies and terraces in powder coated aluminum in five colours and in stainless steel, conceived as an alternative to the common threshold covers in marble and the L-elements in ceramic.

Finishing profiles, junctions and framing elements for terrace edges. Simple to install, the external junctions and the joining pieces allow a perfect result. Innovative pipe systems for the drainage of water from tiled terraces.

For information visit www.profilitec.com

SKIRTING BOARDS & WALL PROTECTIONS- Trims

An extensive range of technical skirtings offering an alternative to traditional wood and ceramic profiles. Designed to provide functional solutions while maintaining aesthetic appeal, the skirtings are durable and resistant to damp conditions. In addition, the aluminium range of skirtings provides the additional benefit of hiding low voltage cabling such as telephone, TV and computer wires. Ideal for a wide range of interior environments in both the contract and domestic markets.

The range of dual-coloured skirtings offers a wide range of colour combinations providing a match for almost any interior.

A range of co-ordinating dual-coloured wall protection strips, for protection against damage from both wheeled and pedestrian traffic completes the range, ideal for a wide range of interiors from healthcare to commercial.

The new “Plano Design” has revolutionized the concept of skirting, with an element developed to be installed as part of the wall, giving a fully coordinated finish to both the wall and floor and becoming an integral element of the design.

For information visit www.profilitec.com